Workpiece Measuring System OPS-20 for Machining Center

Application and Benefit of OPS-20 Probe System ● For machining centers, turning centers, CNC boring and milling machines; ● Used for automatic setting of workpiece reference in batch production; ● Used for quality control before, during and after the production process; ● Reduce production assistance time and improve production efficiency; ● Reduce investment in process equipment and production cost. Composition of OPS-20 probe system 1) OP500 infrared communication probe (including standard probe); Standard probe model: M4-P50-RB6-S35; 2) Taper shank of measuring head (optional as required by the user); 3) OSI-10E infrared signal receiver (including 8m long cable); 4) SP-W10 measurement software package (ten standard measurement functions). Functions of the OPS-20 probe system 1) Infrared coding signal communication is adopted between the measuring head and the receiver; 2) Three different infrared coded signals emitted by the OP500 probe: 3) Four kinds of switching value signals output by cable of OSI-10E receiver: Probe status, error, probe battery voltage low, and probe status pulse number; 4) Indication of the working status of the measuring head: three three-color LED indicators. Characteristics of OPS-20 probe system 1) The OP500 measuring head uses two standard lithium batteries as the power supply, and the battery model is: 14250 3.6V，1200mAh； 2) The OP500 probe is equipped with a new probe reset elastic force adjustment mechanism, which enlarges the probe Range of selection; 3) a new connection and adjustment mechanism is adopted between the main body of the OP500 probe and the taper shank, The needle position adjustment operation is more convenient; 4) The shield of the infrared signal emitter of the measuring head can be made of two kinds of materials to realize the protective performance and emission. For different combinations of distances, the launch distances are: 6m/with glass shield, 4m/with With the polycarbonate shield, the polycarbonate shield has the advantage of resistance to chip impact, especially Suitable for machining centers with bamboo hat type tool magazine; 5) The main body of the measuring head is made of stainless steel, which has excellent anti-rust performance. Technical parameters of OP500 infrared communication probe 1) Measurement direction: ± X, ± Y, + Z 2) Diameter of probe body: 48 mm 3) Standard probe: Length 50mm,? 6mm ruby measuring ball, M4 connecting thread 4) Measuring head one-way repetitive trigger accuracy (2σ): ≤ 1 μm 5) The maximum swing angle of the probe in the XY plane: ± 15 ° 6) The maximum floating stroke of the probe in the Z direction: 5 mm 7) When the standard probe is used, Probe trigger force: 600 ± 30 G in Z direction, XY plane 38 to 40 G (minimum) 70 to 80 G (maximum), 8) Opening mode of measuring head: Rotary start, speed > 300 rpm 9) Closing mode of measuring head: delay (0.5/1/3/5/10/20 minutes) 10) Trigger force adjustment range: 100 ~ 200% 11) Infrared signal transmission range: Radial 360 °, Axial 50 ° to 110 ° 12) Receiver input voltage: 24 ± 10% V DC 13) Protection grade of probe system: IP68 Functions of SP-W10 measurement software package 1) Automatic calibration of measuring needle 2) Protection against probe collision during probe movement 3) Measurement of boss and groove 4) Measurement of holes and shafts 5) XY single plane measurement 6) Measurement of internal and external angles 7) Measurement of the fourth axis 8) Measurement of XY plane angle 9) Three-point measurement of circular arc 10) Measurement of hole center distance

Workpiece Measuring System RPS-L11M for CNC Lathe

Composition and function of RPS-L10 probe system 1) RPS-L10 radio communication probe, including TP200 probe, RPDM radio transmission module, mounting rack and battery compartment; 2) RSI-10 radio signal transmitter-receiver, including 10 meters of cable; 3) SP-W10 measurement software package (five standard functions); 4) Radio frequency of RPS-L10 probe system: 2.4G ~ 2.525G; 5) The working distance between RPS-L10 probe and RSI-10 receiver is 10m; 6) RPS-L10 probe and RSI-10 receiver have two-way communication function; 7) The signal response time of RPS-L10 probe system is less than 1ms, which can realize single trigger measurement; 8) Overall protection grade of the system: IP68 RPS-L10 Radio Probe System--Special for CNC Lathe Main functions: Automatic establishment of workpiece coordinate system and automatic calibration of measuring head Automatically detect and set the process datum of the workpiece in the machine coordinate system Control of Machining Accuracy and Automatic Compensation of Tool Wear Collision protection during probe movement Application and Benefit of RPS-L10 Radio Probe System ● For large and medium-sized turning centers, CNC lathes, grinders, etc.; ● Used for automatic setting of workpiece reference in batch production; ● Used for quality control before, during and after the production process; ● Reduce production assistance time and improve production efficiency; ● Reduce investment in process equipment and production cost. Functions of SP-W10 measurement software package 1) Automatic calibration of measuring needle 2) Protection against probe collision during probe movement 3) Measurement of flange and ring groove 4) Measurement of holes and shafts 5) Single plane measurement Technical parameters and functions of RPS-L10/radio communication probe ● Measurement direction: ± X, ± Y, + Z; ● Standard probe length: 40 mm; ● One-way reset accuracy of measuring needle: 1 μm; ● The maximum swing angle of the probe in the XY plane is 12 °, and the T stroke of the probe in the Z direction is 5 mm; ● XY plane minimum trigger force: 38 ~ 40 G, maximum trigger force: 70 ~ 80 G; ● Trigger force in Z direction: 200 ~ 230 G; ● The main body of the measuring head is made of high-quality stainless steel with the best anti-rust performance; ● Opening mode of measuring head: M code start; ● Closing mode of measuring head: delay closing, M code closing; ● Optional delay closing time: 1, 2, 3, 4, 5, 6, 7, 120 minutes; ● Probe start time: < 1 second; ● Range of probe transmitting signal: circumferential 360 °, axial 360 ° ● The probe can transmit three signals: trigger, error and low voltage. ● The probe status is indicated by three three-color LED indicators. Power supply of measuring head: one high-energy lithium battery, specification: 26500, 3.6 V, 7000mAh; A small-capacity lithium battery can also be used if the space of the cutter head is small. Specifications: 14250，3.6V，1200mAh ● Probe working current: 1.2mA, trigger current: 5.0mA, sleep current: 100μA; ● A new battery can work for 1.5 ~ 2 years; Technical parameters and functions of RSI-10 wireless signal transmitter-receiver ● Four kinds of SSR signals including probe trigger, error, low voltage and pulse are provided for the machine tool, which are respectively sent by 4 LEDs display the working status of the system; ● Input power: 24 ± 10% V DC; ● Receive the M code of the machine tool and control the start or close of the measuring head; ● With a dial switch, the start mode and sleep time of the probe can be set;

Workpiece measuring system RPS-20 M for gantry boring and milling

Tool setting instrument TTC100 for tool breakage detection